USA Tel: (201) 880-0366 | | Fax (902) 542-7479 | Canadian Tel: (902) 542-7478
Helping keep British Motorcycles on the road for over 30 years - established 1977


Part Number 57-3709/E

Designed by noted Triples expert Richard Darby of 3D Motorcycles and made in Coventry, they are slightly thicker than the present ones on the market which will aid a lighter clutch pull.

As Richard says: “It is a known fact that the triple clutch can be difficult to set up and also suffer from a heavy action to pull in the lever. Many of us are aware that with a reduced depth from floor of the "basket" to the tops of the side walls, a lighter action can be obtained. This can be achieved by using a friction plate with a greater overall thickness, effectively putting the diaphragm spring under greater tension and so closer to going "over centre", so that those left hands and wrists of yours can have an easier life.”